Shenzhen Consnant Technology Co., Ltd.
Shenzhen Consnant Technology Co., Ltd.
Add to Cart
Minimal Capacity 50AH Lithium Iron Battery Pack With Flexible Batt. System
The battery bank in the description is suitable for power products of back up.
| Cell | model | CNB4850 | |
| Capacity(0.5C) | 50Ah | ||
| Rated voltage(V | 3.2V | ||
| Typical Impedance (mΩ) | ≤1 mΩ | ||
| Battery material | lithium iron phosphate | ||
| PACK | Combination method | 1P16S | |
| Minimal capacity(0.5C) | 50Ah | ||
| Nominal voltage | 51.2V | ||
| Max. charge voltage | 58.2V | ||
| Discharge cut‐off voltage | 40V | ||
| Max Charge current | (0.5C)25A | ||
| Max Working current | (1C)50A | ||
| Standard charge current | (0.2C)10A | ||
| Standard charge current | (0.5C)25A | ||
| Pack Impedance standard | ≤100 mΩ | ||
| Weight (Approx.) | ≈32Kg | ||
| Max. dimension(L×W×H)(mm) | ≤420*482*133 | ||
| Operating temperature | Charge temperature | 0℃～45℃ | |
| Discharge temperature | ‐20℃～55℃ | ||
| Battery Management System | Single cell over‐charge cut‐off voltage | 3.7V | |
| Over‐charge release voltage | 3.35V | ||
| Single cell under‐discharge cut‐off voltage | 2.5V | ||
| Discharge release voltage | 2.7V | ||
| Over‐discharge cut‐off current | 35A | ||
| Over‐discharge cut‐off current delay | 1S±0.5S | ||
| Short‐circuit protection | 80A | ||
| Short‐circuit protection delay | ≤1mS | ||
| Condition for the recovery of over‐current and Short‐circuit | Charge to remove | ||
| Balance current | 50mA | ||
| Balance Condition | ≥3.5V, differential pressure 50mV | ||
| Communication | RS485,RS232 | ||
