Pure sine wave inverter.
Configurable mains input voltage range for home appliances and personal computers via load requirements.
Configurable battery charging current based on load requirements.
Configurable Mains/Solar Charger priority via LCD setting.
Compatible to mains input and generator input.
Auto restart while mains is recovering.
Overload/Over temperature/ short circuit protection.
Smart battery charger design for optimized battery performance.
Cold start function.
Remote monitor function via SNMP Card(optional).

Basic System Architecture

The following illustration shows basic application for this solar inverter. It also includes following devices

to have a complete running system:

Consult with your system integrator for other possible system architectures depending on your requirements.

This inverter can power all kinds of appliances in home or office environment, including motor-type

appliances such as tube light, fan, refrigerator and air conditioner.

Function Key :

Function Key	Description
ESC	To exit setting mode
UP	To go to previous selection
DOWN	To go to next selection
ENTER	To confirm the selection in setting mode or enter setting mode

Rack Mount Inverter Technical Parameter :

Model	3.5KW	5.5KW
Input Voltage Waveform	Sinusoidal (utility or generator)
Nominal Input Voltage	230Vac
Low Loss Voltage	170Vac±7V(UPS);90Vac±7V(Appliances)
Low Loss Return Voltage	180Vac±7V(UPS);100Vac±7V(Appliances)
High Loss Voltage	280Vac±7V
High Loss Return Voltage	270Vac±7V
Max AC Input Voltage	300Vac
Nominal Input Frequency	50Hz/60Hz(Auto detection)
Low Loss Frequency	40±1Hz
Low Loss Return Frequency	42±1Hz
High Loss Frequency	65±1Hz
High Loss Return Frequency	63±1Hz
Output Short CircuitProtection	Circuit Breaker
Efficiency (Mains Mode)	> 95%(Rated load, battery full charged)
Transfer Time	10ms typical(UPS);20ms(Appliances)

Model	3.5KW	5.5KW
Rated Output Power	3.5KW	5.5KW
Output Voltage Waveform	Pure Sine Wave
Output Voltage Regulation	230Vac±5%
Output Frequency	50Hz
Peak Efficiency	93%
Overload Protection	5s@±150%load;10s @110%～150%load
Surge Capacity	2* rated power for 5 seconds
Nominal DC Input Voltage	24.0Vdc	48.0Vdc
Cold Start Voltage	23.0Vdc	46.0Vdc
Low DC Warning Voltageload<50%load≥50%	23.0Vdc	46.0Vdc
Low DC Warning Voltageload<50%load≥50%	22.0Vdc	44.0Vdc
Low DC Warning ReturnVoltageload<50%load≥50%	23.5Vdc	47.0Vdc
Low DC Warning ReturnVoltageload<50%load≥50%	23.0Vdc	46.0Vdc
Low DC Cut-off Voltageload<50%load≥50%	21.5Vdc	43.0Vdc
Low DC Cut-off Voltageload<50%load≥50%	21.0Vdc	42.0Vdc
High DC Recovery Voltage	32.0Vdc	62.0Vdc
High DC Cut-off Voltage	33.0Vdc	63.0Vdc
No Load PowerConsumption	<35W

Product Tags:

24V / 48V Rack Mount Inverter 3.5KW / 5.5KW Power Supply For CCTV Camera / Telecom

UPS Uninterrupted Power Supply